Home > Industry news

Surface Mount (SMT) Assembly Cost in China

Surface-mount technology is widely used by most of the turnkey PCB assembly companies as it results in an overall reduction in the Surface Mount (SMT) Assembly cost in China. Many of them prefer these types of SMT components because they are smaller in size as compared to Through-hole components and can be mounted on either side of PCB.

The SMT component can weigh as little as one-tenth of their conventional through-hole counter parts, which leads to significant reductions in weight of the Surface Mount assembly. SMT has helped significantly in solving the space problems that were commonly experienced with the Through-hole mounting. SMT is suitable for high volume production that provides the added advantage of lower costs per unit assemblies, which is not possible with through-hole technology.

The SMT assembly cost consist of different elements such as solder stencil making, pick-and-place SMT machine programming, reflow soldering process, cleaning of solder flux, labor charge, quality inspection methods adopted, etc. This cost varies if there is a requirement of dual-sided SMT assembly.

Dual-sided SMT assembly leads to a considerable increase in cost as the whole process is repeated again for placing the components on both sides of the circuit board. This process consumes additional solder stencil making, SMT machine programming and reflow soldering for the other side, which may affect the average assembly cost.

A typical example of the average SMT assembly part can be given through this illustration: Board Quantity 150, Components on both sides, BOM lines 40, SMT 125, Fine Pitch 3, Leadless/QFN 1 is $ 30.4 per board and average assembly cost per SMT part is $ 0.235 in China. The competitive SMT assembling rate enables most of the customers to get desirable benefits of SMT assembling in China.

China has emerged as a popular place for SMT printed circuit board assembly because of easy and low cost availability of small and thin surface mount parts and inexpensive labor. There are scores of components available with good standards and at a discounted rate. Most of the circuit board assembling companies look forward to China to get the benefit of reduced operational cost and time, as well as improved quality.

Some of turnkey PCB assembly companies make use of X-Ray inspection to check the joint soldering SMD qualities. Implementation of extra prevention and detection processes helps to produce the desired quality level, which increases the price. Conversely, removal of various quality checking processes would lead to decrease in the cost of SMT assembling. It is suggested to discuss balance between quality and cost with the manufacturer to make sure that overall expectation of the deliverables is achieved.

Bittele is an experienced SMT assembly house in China. Their employees are highly trained and considered professionals in this area. Bittele performs single and double sided placement of all component types. The SMT soldering process used by Bittele is carefully matched to the customer’s design and constraints. Bittele provides DFM advice from the earliest stages of the design. Bittele’s instant PCB assembly quote calculator helps the customer to estimate the rough cost of project’s assembly from the very beginning.

Flason Electronic Co.,ltd provide a full SMT Spare parts solutions, including SMT Feeder, SMT Nozzle, SMT Control Card, SMT Motor, SMT Laser | Sensor, SMT Feeder Storage Cart, SMT Servo driver, SMT Solenoid Valve, SMT Filter, SMT Feeder parts, Chip mounter Parts, SMT Equipment etc. If there's any kind SMT Spare parts you may need, please contact us for more information: wechat whatsapp:008613691605420, Skype: flasonsmt, Email: sales@flason-smt.com.

1) This is the first time I use this kind of machine, is it easy to operate?

There is English manual or guide video that show you how to use machine.

If you still have any question, please contact us by e-mail / skype/ phone /trademanager online service.

2) If machine have any problem after I receive it, how can I do ?

Free parts send to you in machine warranty period.

If the part is less than 0.5KG, we pay the postage.

If it exceeds 0.5KG, you need to pay the postage.

3) MOQ ?

1 set machine, mixed order is also welcomed.

4) How can I buy this machine from you? ( Very easy and flexible !)

A. Consult us about this product on line or by e-mail.

B. Negotiate and confirm the final price , shipping , payment methods and other terms.

C. Send you the proforma invoice and confirm your order.

D. Make the payment according to the method put on proforma invoice.

E. We prepare for your order in terms of the proforma invoice after confirming your full payment.

And 100% quality check before shipping.

F.Send your order by air or by sea.

5)Why choose us ?

A. Gold supplier on Alibaba !

B. Trade assurance to US$54,000 !

C. Best price & Best shipping & Best service !



CONTACT US

Contact: Tommy

Phone: +86 13691605420

Tel: +86-755-85225569

Email: sales@flason-smt.com

Add: Flason industry park shajing town Baoan district shenzhen China